Vesc 4.10 Pinout

General topics and discussions about the VESC and its development.
saul
Posts: 6
Joined: 27 Dec 2015, 10:56

Vesc 4.10 Pinout

Postby saul » 27 Dec 2015, 11:02

Finally got a chance to setup my vesc and loaded the latest 2.5fw. :D

I was going to connect a pot or an nrf but I can't find any wiring diagrams. and I noticed that my 4.10 vesc (from enertion) has 7 pins on the uart/i2c/adc connector.

If anyone can point me to a pinout or diagram that would be great!

if it doesn't exist yet we can start collecting information here and make one. :idea:

thanks,
Saul

david
Posts: 36
Joined: 15 Dec 2015, 13:19
Location: Hamburg, Germany
Contact:

Re: Vesc 4.10 Pinout

Postby david » 27 Dec 2015, 11:30

Just quoting Benjamin:

benjamin wrote:The connection is like:

NRF------VESC
----------------
MISO-----MISO
MOSI-----MOSI
SCK------SCK
CSN------NSS
+3.3V----3.3V
GND-----GND
CE-------3.3V
IRQ------Not connected
VESCs made in Germany http://www.esk8.de

saul
Posts: 6
Joined: 27 Dec 2015, 10:56

Re: Vesc 4.10 Pinout

Postby saul » 27 Dec 2015, 23:27

Thanks david, where did you find that?

I still need to figure out what pins on the vesc correspond to miso, mosi, sck, ...

david
Posts: 36
Joined: 15 Dec 2015, 13:19
Location: Hamburg, Germany
Contact:

Re: Vesc 4.10 Pinout

Postby david » 27 Dec 2015, 23:37

Have a look on the second picture here, it's written on the top (just flip it around ;) ):
viewtopic.php?f=6&t=23#p114
VESCs made in Germany http://www.esk8.de


Return to “General”

Who is online

Users browsing this forum: No registered users and 2 guests