VESC 3dp case

Discuss hardware related to the VESC such as the NRF nunchuk.
Posts: 1
Joined: 17 Dec 2015, 23:30

VESC 3dp case

Postby exco » 31 May 2016, 23:51

I haven't stumbled on a good case and was annoyed by the look and fitting all parts in the grey pvc junction box.
So I created this snug fit box that you can easily print. Needs 2.5mm polyamide screws for mounting the case as well as the VESC.

Since this had to be finished in a hurry I had it printed on some PLA spitter but it will for sure be even nicer from shapeways or the like.

Suggestions for improvement are welcome.
You can find the stl files on Thingyverse.
IMG_20160529_022145.jpg (157 KiB) Viewed 2681 times
IMG_20160529_023429.jpg (60.36 KiB) Viewed 2681 times
IMG_20160529_023014.jpg (136.92 KiB) Viewed 2681 times
Last edited by exco on 01 Jun 2016, 18:03, edited 1 time in total.

Posts: 40
Joined: 13 Apr 2016, 10:27
Location: uk

Re: VESC 3dp case

Postby yes_we_can_gogreen » 01 Jun 2016, 11:56


Posts: 13
Joined: 11 Apr 2016, 06:17

Re: VESC 3dp case

Postby rmrf » 08 Jun 2016, 11:28

One suggestion would be to make optional holes for heat sinks. 10x10mm alu heatsinks could easily be found on ebay. Just make plastic above mosfets a little bit thinner so it can easily be cut out with a knife.

Return to “Related Hardware”

Who is online

Users browsing this forum: No registered users and 2 guests